Setting Time Offset; Setting Automatic Update For The Time And Date; Active Accry (Accessory) Type; Selecting Active Accry (Accessory) Type - Motorola MTM800 FuG Feature User Manual

Feature User Guide

5.7.8.6 Setting Time Offset

Procedure Steps
1 From the home screen, press MENU key.
2 Select Setup → Time & Date → Set → Time Offset.
Enter time offset using NAVIGATION keys.
3
You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or behind.
4 Press Done.

5.7.8.7 Setting Automatic Update for the Time and Date

Procedure Steps
From the home screen, press MENU key.
1
2 Select Setup → Time & Date → System Update.
Select one of the following:
3
• Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
• Time Only — Time displayed is calculated from the offset programmed by your service provider
added or subtracted from the infrastructure time.
• Time & Offset — Time and offset are updated after receiving from the infrastructure.

5.7.9 Active Accry (Accessory) Type

This menu item allows you to choose which of the accessory selection mode is active.

5.7.9.1 Selecting Active Accry (Accessory) Type

When and where to use:
Use this menu item to determine which microphone has priority during Alternating Hot Microphone or Ambience
Listening.
5-40 -