Short Number Dial; Dual Control Head; Interactions Between Control Heads - Motorola MTM800 FuG Feature User Manual

6.8 Short Number Dial

This feature allows you to dial part of the full number of the person you wish to call. Your radio automatically
completes the number.
Example:
Your radio number is 4282564.
1. Dial 564 (instead of 4282564, the full number).
2. To place the call, press the PTT button or the SEND key.

6.9 Dual Control Head

This feature allows you to use two control heads with one transceiver. The control heads are of equal importance and
have almost identical functionality, the only difference is second PTT installed on the Telephone Style Control Head.
In Dual Control Head mode, when you press MENU → Setup you can choose between two control heads: CH1
and CH2. Almost all menu items inside them are common for both control heads, except for: Set Volume, Accry
Setup, and Font Level (provided that control heads are different). These menu items are configured separately for
each control head.
If this feature is enabled by your service provider, appropriate icons appear on the display.
Check with your service provider default accessory selections and the radio behavior for all types of calls as
each control head can have different setup.
Controls and Indicators
Menu Structure

6.9.1 Interactions between Control Heads

Your service provider can connect to one transceiver either two the same control heads (two Remote Ethernet
Control Heads, or two Telephone Style Control Heads), or two different control heads (one Remote Ethernet
Control Head and one Telephone Style Control Head).
You can use both control heads interchangeably for the same activity (for example, writing a message). If you start
an activity on one control head you can continue it on the second, provided that token is free.
Token is a right to use a key or button for a period of time. If you press a key/button on one control head, token
activates on it, and no one can press anything on the second control head until token time passes. After you release
the key/button, token becomes available again and can be taken over by the second control head. When token is
activated, Key Press Token icon is visible on the display. By default, token time is set to 3 seconds.
-
6.8 Short Number Dial
6-5