Broadcast Call - Motorola MTM800 Feature User Manual

Receiving a Private PPC during a Call
If configured by your Service Provider, the MTM800 receives
the PPC, drops the on-going, non-emergency, lower priority
voice call, and connects to the higher priority private call.
A PPC with lower or equal priority, will be dropped without
any indication to the called user and will enter the missed call
list.
A PPC with emergency call priority will be displayed on the
screen as "Emergency" (instead of "Priority").
Half-duplex Private PPC Received
<Any> in Use
Full-duplex Private PPC Received
<Any> in Use

Broadcast Call

The Broadcast Group Call (also called Site
Wide Call) is a high-priority group call from
the console operator (or dispatcher) to all
terminal users located at one or more
sites. The terminals are configured to monitor a Broadcast
Call, but the users cannot talk back.
The call can be received as normal
broadcast call or emergency broadcast
Call.
The Broadcast Call pre-empts an on-going
Group Call that has the same (or lower) call priority.
For selecting a talkgroup during a broadcast call, see
"Selecting a Talkgroup" on page 30. For changing range
during a broadcast call see "Selecting a Range" on page 34.
Prvt Priority
David
Reject
Press
PTT
Prvt Priority
David
Reject
Press
any key
Private in use
Priority
Private in use
Priority
Group In Use
Broadcast
Status
Emgcy In Use
Broadcast
Status
23