Active Accessory (Accry) Type; Selecting The Active Accessory (Accry) Type; Volume Control (Cntrl); Setting Volume Control (Cntrl) - Motorola TETRA MTM5000 Series User Manual

68015000180-MR
Chapter 4 : Main Menu
The Accry Setup menu contains the supported accessories, represented by their Model Number as
defined by the related Audio Device Descriptor (ADD). ADD is a set of parameters in the radio that
defines the audio settings, such as gains and filters settings, for each accessory.
IMPORTANT: Do not connect RSMs to both connectors at the same time. To ensure correct
connection, do not press any RSM buttons when connecting the RSM to the radio.
4.7.10

Active Accessory (Accry) Type

This menu item allows you to choose which of the accessory selection mode is active.
4.7.10.1

Selecting the Active Accessory (Accry) Type

When and where to use: Use this menu item to determine which microphone has priority during
Alternating Hot Microphone or Ambience Listening.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Active Accessory Type.
3 Select one of the following options:
• Control Head Accry – Higher priority is given to the microphone connected to the control
head.
• Transceiver Accry – Higher priority is given to the microphone connected to the transceiver.
• Control Head Accry – Higher priority is given to the microphone connected to the control
head. Applicable to RECH.
• Transceiver Accry – Higher priority is given to the microphone connected to the transceiver.
Applicable to RECH.
• Front Accry – Higher priority is given to the microphone connected to the front accessory
connector. Applicable to TSCH.
• Rear Accry – Higher priority is given to the microphone connected to the rear accessory
connector. Applicable to TSCH.
NOTE: In case the PTT on any connected accessory is pressed, the highest priority is
assigned to that accessory.
4.7.11

Volume Control (Cntrl)

This menu item allows you to determine which audio output device, speaker or earpiece, is being
adjusted when you turn the Rotary Knob.
4.7.11.1

Setting Volume Control (Cntrl)

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Volume Cntrl.
3 Select one of the following options:
102