Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → Format → Format Date.
3 Select (D — day, M — month, Y — year):
•
DD/MM/YY
•
MM/DD/YY
•
DD-MON-YY
•
YY/MM/DD
Setting the Date Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → Set → Set Date.
3 Enter current time using N
4 Press Done.
Setting Time Offset
Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → Set → Time Offset.
3 Enter time offset using N
Note: You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or behind.
4 Press Done.
Setting Automatic Updates for the Time and Date
Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → System Update.
3 Select one of the following:
•
Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
•
Time Only — Time displayed is calculated from the offset programmed by your service provider added or
subtracted from the infrastructure time.
•
Time & Offset — Time and offset are updated after receiving from the infrastructure.
Energy Economy
Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all downlink time
slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode is not needed.
Enabling Energy Economy
Procedure:
1 From the home screen, press the
key.
MENU
key.
MENU
keys.
AVIGATION
key.
MENU
keys.
AVIGATION
key.
MENU
key.
MENU
Main Menu | 83
| |
Send Feedback