CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
1.) Power On/Off Touch Button
After the Power On/Off touch is pressed, two dashes appear in the program display. Touch the ''On/Off touch but-
ton'' with your fingertip for 1 sec to turn the machine on or off.
2.) Program Touch Button
Use the Program touch button to select a suitable program for your dishes.
3.) Program Display
The program display indicates the length of the programs and the remaining time during the program. You can
also follow-up the selected programs by this display.
4.) Delayed Start Touch Button
You can delay the start time of a selected program from 1 to 19 hours by pressing the delayed start touch button of
the machine. When the delayed start touch button is pressed, "1h" appears on the program display. If you continue
pressing the delay timer touch button, the time will increment from 1 to 19 shown on the display. The delayed start
can be activated by selecting the delay time and the desired washing program with the Program touch button. It
is also possible to select the program first and the delayed start afterwards, depending on the last value entered.
To cancel delayed start, either select the delay timer as ''0h'', or hold the program touch button for 3 seconds. The
display will inform you how many seconds you need to hold the button by "3-2-1.." to cancel the delay.
Note: If the delay touch button is pressed and held, the delay timer starts changing faster (the rate of change is
proportional to the hold pressing time). When the delayed start touch button is pressed for a long period of time,
the counter stops at "0h".
5.)Energy Save Touch Button
The energy save option activates the door opening system at the end of the program. The auto door
opening system provides the required drying performance at low rinsing temperatures and reduces
6.)Extra Lower/Upper Basket Touch Button
Using the Extra lower/upper basket function, three sorts of washing up can be done those being lower basket,
upper basket and both baskets.
If you have only a few of dishes in your machine and if you have to wash them, you can also activate
the semi-filling function for some programs.
If you have dishes in both baskets, press the touch button and select the position in which both lamps
If you have dishes in the upper basket only, press Extra lower/upper basket touch button and select the
lamp where the figure above is lit. Thus, your machine will perform washing in the upper basket, and a
detailed washing cycle will be carried out by the extra water spray in the upper basket.
If you have dishes in the lower basket only, press Extra lower/upper basket key and select the lamp where the
figure below is lit. Thus, your machine will perform washing in the lower basket, and a 360° washing cycle will
be carried out by the two extra sprays on the base. Make sure that there are no dishes in the upper basket
while using this feature.
Note : If you have used an extra feature on the latest washing program, this feature will remain active on the
next washing program until the machine is switched off and on again. If you do not want to use this feature on
the newly selected washing program, press the selected feature button again, and check that the lamp on the
button goes off.
Note: "When a program that is incompatible with the Extra silent & fast option is selected, when the button is press
the a buzzer sound is heard whilst indicates that the selected option is not available.