Table of Contents
Advertisement
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Switching on the machine
1
Machine is energized when the On/Off
button is pressed , two dashes appear in
the program display and the end of program
indicator turns on.
1. Press the Power On/Off key.
2. Select the program suiting your dishes via the Program Selection button.
3. If you prefer or wish to prefer , you can choose additional function.
4. Close door. The program starts automatically.
Note: If you decide not to start to machine after selecting the program, just press the on/off button. Your machine
will become ready for the new program selection when you press on/off button again. You can select the new
program by pressing the program selection button. Program follow-up.
Program follow-up
Do not open the door before the
program ends.
Changing a programme
If you would like to change programs while a washing program is continuing.
Note: When the door of the machine is opened in order to stop the washing program before it is completed first
open the door slightly in order to avoid water spillage.
End of program indicator on the control panel
turns on when the selected washing program
is completed .Your machine also gives a
buzzer sound for "5 times" when the program
is completed.
Open the door and select a new
program by pressing the program
selection button.
When you select a program with the
program selection button,the program
you select ( P1,P2,etc )appears on the
program display and the end of program
indicator turns off.
After closing the door , the new
program started will resume the
course of the old program.
EN-23
3
Advertisement
Table of Contents
