CHAPTER-5: LOADING YOUR DISHWASHER
LOADING YOUR DISHWASHER
Place dishes properly into the machine. There are two seperate baskets to load dishes into your machine.The
lower basket is for round and deep items. The upper basket is for thin and narrow items. You are recommended
to use the cutlery grid in order to obtain the best result. To avoid any possible injuries, place long-handle and
sharp-pointed knives with their sharp points facing down or horizontally on the baskets.
Warning: Place your dishes into your machine in a way that they will not prevent the upper and lower spray arms
You can place different sizes of glasses under these racks thanks
to the adjustable height feature. You can use racks in 2 different
Foldable racks on the upper basket are designed in order to let
you place big items easier such as pots, pans, etc. If required,
each part can be folded separately, or all of them can be folded
and larger spaces can be obtained. To adjust the foldable racks,
either raise them upwards,or fold them down.
Top basket height adjustment while it is full
The basket height adjustment mechanism on the top basket of your machine is designed to let you adjust the
height of your top basket upwards or downwards, without removing it from your machine when it is full, and create
large spaces at the top or bottom area of your machine as needed. The basket of your machine is set to the upper
position in factory setting. In order to raise your basket, hold it from both sides and pull it upwards. In order to
lower it, hold it from both sides again, and leave it. In the loaded basket adjustment mechanism, make sure that
both sides are in the same position. (up or down)
In the lower basket of the machine, there are four folding racks that are designed to allow you to make it easier
to place big items such as pots, pans, etc. If required, each part can be folded separately, or all of them can be
folded and larger spaces can be obtained. To adjust them , raise them upwards, or fold down.