Exhaust Drain Tube; Exhaust Tank - Broaster 1600 Service Manual

EXHAUST DRAIN TUBE

Tube (2) drains condensation from exhaust
tank into the condensate pan.

EXHAUST TANK

Steam and vapors are exhausted through
this tank.
See previously mentioned operator habits.
Tank (3) can become obstructed. The
obstruction usually forms on the bottom of
tank where exhaust drain tube (2) is con-
nected. Tank will then become filled with
liquid. Liquid may be forced up the stack (4)
when pressure is released at the end of a
cooking cycle.
Manual #13898 2/00
Cleaning:
1. Remove exhaust drain tube (2) from
bottom of the tank (3).
2. Remove two screws from the stack (4)
which mount tank to the unit.
3. Pull tank away from the frame.
Exhaust tube (5) will separate from the
tank.
4. Remove two screws holding cover (6)
to the tank. Remove rubber grommet
(7) on side of the tank. Set the tank in
a sink and clean thoroughly.
5. Clean silicone rubber from cover
underside. Seal cover with silicone
during assembly.
6. Clean all tubes.
7. Replace grommet (7) if necessary.
8. Assemble in reverse order.
8 - 2