Table of Contents
Advertisement
A. Technical appendix
Module parameter pneumatic interfaces
types CPX−GP−03−4.0 and CPX−GP−CPA−..
Monitoring the CPX module
Undervoltage at valves (V
Short circuit at valves (SCV)
Monitoring wire fracture channel x
Channel 0...7:
Channel 8...15:
Channel 16...23:
Channel 24...31:
1)
Force channel x
Force mode outputs channel x
Force state outputs channel x
1)
m = module number (1...10; counting of the modules from left to right, beginning with 0)
x = channel number (valve number; 0...25: Midi/maxi 0...21: CPA)
2)
Access is made protocol−specific (see manual for handheld)
Tab. A/7:
Parameters of the pneumatic interface
Module parameter MPA pneumatic
module types VMPA1−FB−EMG−8 and
VMPA1−FB−EMS−8
Monitoring the CPX module
Undervoltage at valves (V
1)
Force channel x
Force mode outputs channel x
Force state outputs channel x
1)
m = module number (1...17; counting of the modules from left to right, beginning with 0)
x = channel number (valve number; 0...7)
2)
Access is made protocol−specific (see manual for handheld)
Tab. A/8:
Parameters of the MPA pneumatic modules
A−8
Function no.
4828 + m * 64
)
val
1)
4828 + m * 64 + 6
4828 + m * 64 + 7
4828 + m * 64 + 8
4828 + m * 64 + 9
Function no.
4828 + m * 64
)
val
Default setting
1)
Active
Inactive
Inactive
1)
1)
1)
1)
2)
Disabled
Reset signal
Default setting
1)
Active
2)
Disabled
Reset signal
Festo P.BE−CPX−FB23−EN en 0308NH
Advertisement
Table of Contents
