Advertisement
Installation Instructions
Connecting to electrical supply
WARNING: THIS APPLIANCE MUST BE EARTHED!
The cooker should be plugged into a double pole switch or an unswitched
socket outlet which is properly connected to the house electricity distribution
system and efficiently earthed.
The flexible mains lead is fitted with a 13 amp BS1363 plug having a fuse of 3
amp capacity, however, should this plug not fit the socket outlet in your home,
it should be cut off and replaced with a suitable plug as described below.
NOTE: If cut off as above, the plug must be discarded, as it may be pluged
into an electrical socket with the obvious danger of electrocution.
IMPORTANT: The wires in the mains lead are coloured in accordance with
the following code:
GREEN AND YELLOW
BLUE
BROWN
If you fit your own plug and the colours of the wires in the mains lead do not
correspond with the markings on your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the
terminal in the plug marked E or earth symbol or coloured Green or Green
and yellow. The wire which is coloured Brown must be connected to the
terminal in the plug which is marked with the letter L or coloured red. The wire
which is coloured Blue must be connected to the terminal in the plug which is
marked with the letter N or coloured Black.
When wiring the plug ensure that all the strands of wire are securely retained
in each terminal and that the mains lead clamp is tightened.
IF IN DOUBT CONSULT A QUALIFIED A QUALIFIED ELECTRICIAN.
-
EARTH
-
NEUTRAL
-
LIVE
8
Hide quick links:
Advertisement
