Select The Base Station; Default Settings; Default Settings Of The Handset - Topcom BUTLER 565 User Manual

• P ress the '

3.7 SELECT THE BASE STATION

This pro c e d u re will select the base station and will make a connection.
• P ress the buttons '
On the display appear the base
numbers of the base stations to which
the handset is re g i s t e red. The base
number of the currently selected base
b l i n k s .
• Select the base number of the base
station you want (for ex.) Press '2'.
The selected base number blinks.
R E M A R K S
• Selecting '0': the handset will search all base stations to which it is re g i s t e red and
s y n c h ronizes them to the base station that was found first.
• Selecting others: The Handset will search only the defined base station.
• P ress the '
The handset will now search only base
number 2.

3.8 DEFAULT SETTINGS

3.8.1 Default Settings of the Handset

This procedure will reset all the parameters to default values and will erase all
registered base stations.
• Switch off the handset (press and hold the '
standby mode).
• Press the buttons '*' and '#' simultaneously and switch on the handset (press
the ' ' button). The default values of the handset have now been reset.
Default Parameter Values
Ringer Pattern
Ringer Volume
Speaker Volume
Key Tone
Lock Mode
Memory numbers
Redial memory
Babycall memory
Base Number Display
' b u t t o n .
' and 'I N T' .
' b u t t o n .
69
INT
1
1 2 3 4
0 1 3 4
' button for about 1 sec. at
4
2 (middle)
2 (middle)
ON
OFF
ERASED
ERASED
ERASED
ON