Additional Handsets And Bases; Adding A New Handset; Removing A Handset; Select A Base - Topcom Butler 6040 User Manual

Topcom asia ltd. butler cordless telephone user guide
Table of Contents

Advertisement

Topcom Butler 6040
9.9.1 Delete template
From the standby screen, press SMS to open the SMS menu.
Scroll down to Templates and press OK. Scroll to the template you want and press OK.
Scroll to Delete Template. Press OK.

10 Additional handsets and bases

You can subscribe up to 5 handsets on a Butler 5500 base. Each handset can register to 4
base stations and the user can select which base he wants to use.

10.1 Adding a new handset

Only needed when you have deregistered a handset or when you bought a new one !!
First put the base into registration mode:
Press and hold the paging
The
LED will start to blink on the base for 90 seconds. During that time the base is
ready to register a handset.
On the handset:
Select Menu to open the menu.
Select Registration with the navigator and press OK.
Select Register Handset with the navigator and press OK.
Select the number of the base to be associated with the handset (1 to 4). Confirm by
pressing OK.
Enter the system PIN (0000 by default) and confirm with OK. A series of numbers
appears on the screen, representing the base ID. Confirm with 0K. Your handset is
registered.

10.2 Removing a handset

This procedure needs to be carried out on a different handset from the one you want to
uninstall.
Select Menu by pressing the left menu key.
Select Registration with the navigator and press OK.
Select De-register with the navigator and press OK. Enter the system PIN (0000 by
default) and press OK.
Select the handset to uninstall with the navigator and press OK.

10.3 Select a base

You can switch your Butler 6040 handset between bases. You can also set it to automatically
base select with the strongest signal. The handset must first be registered with each base
individually.
Press MENU then scroll to Registration and press OK.
Scroll to Select Base then press OK. The current base being used is highlighted.
Select the base you want or select Automatic to connect to the base with the strongest
signal. Press OK.
30
button on the base until you hear two beeps.
Topcom Butler 6040

Advertisement

Table of Contents
loading

Table of Contents