Paging From Base To Handset (Up To 6 Handsets); Internal Call To Another Handset - Topcom BUTLER 565 User Manual

3.2.3 Paging from Base to Handset (up to 6 Handsets)

The handset starts ringing when the Paging button is being pressed, but an
internal call between base and handset is not possible.
• Press the Paging button on the base
station. All handsets start ringing for
20 sec. If there's no answer within these
20 sec., the paging will be automatically
stopped.
• To cancel this mode, press the Paging button once more. All handsets stop
ringing.
REMARKS
Paging is only possible when the base station is in idle mode.

3.2.4 Internal Call to another Handset

• Press the 'INT' button.
You will hear the dialling tone and the
handset number is displayed.
When you are making an internal call,
the handset number of the handset that
you want to contact, appears on the
display. If the other handset is already in
internal communication with a third
handset, both of these numbers are
shown on the display.
• Enter the desired handset number
(1-6), ex. enter ' 2'.
or
• Press '*' if you want to call all subscribed
handsets. All the handset numbers of the
subscribed handsets are displayed.
When the call is answered, you will hear
the ringing tone. If the called party is
busy or unavailable, you hear a busy
tone.
Press the ' ' button or the 'INT' button to disconnect the internal call.
REMARKS
If the called party does not answer this call within 30 seconds, this call will be disconnected
automatically. Only one internal call is possible.
3-4
2
2 3 4 5 6
53
I N T
1
I N T
1
I N T
1
I N T
1