Operating Instructions; Installation - Topcom BUTLER 565 User Manual

BATTERY indicator
Indicator rechargeable battery. The indicator blinks when the battery is low.
Battery capacity 25%
Battery capacity 50%
Battery capacity 75%
Battery capacity 100%

3 Operating Instructions

3.1 Installation

• Connect the phone lines to the base unit
and put the batteries into the battery
compartment.
• When the handset is placed on the charger unit, the handset batteries are
being charged. If the battery has been completely discharged, it re q u i res 7 hours
to fully re c h a rg e .
Power off
• Press and hold the '
standby mode.
Activate handset
• Press the '
The handset is searching the base
During base searching, the base number appears on the display. It indicates the
base that the handset is currently searching for.
• '-0-' means that all bases, to which this handset is registered, are being
searched. (Automatic Searching)
• '-1-', '-2-', '-3-', '-4-' displays the number of the base station to which the
handset is registered.
REMARKS
You can program the base number you want to make a connection with. If you do not want the
base and handset number to be shown on the display, you can deactivate this function.
' button for about 1 second when the handset is in
' button briefly when the handset is deactivated.
51
-1-
BASE NO HANDSET NO
H1