Measuring Posture - Topcom CE0197 5331 User Manual

10 Measuring posture

1. Relax your entire body, especially the area between
your elbow and fingers. Place your elbow on a table so
that the cuff is at the same level as your heart.
Your heart is located slightly below
your arm pit.
2. If the cuff is not at the same level as your heart or if you
can not keep your arm completely still throughout the
reading, use a soft object such as folded towel to
support your arm.
3. Turn your palm upwards.Sit upright in a chair, and take
5-6 deep breaths. Avoid leaning back while the
measurements being taken.
11 Measurement
11.1 Important
1. This monitor automatically switches off 1 minute after the last key operation.
2. To interrupt the measurement, simply press any key. The cuff will deflate
immediately after a key is pressed.
3. During the measurement, do not talk or move your arm or hand muscles.
4. The result will be stored automatically in the selected Memory Zone. Select the
desires Memory Zone before measurement (see §12)
12 Procedure
1. Press the START/STOP button to activate the display.
2. Press the UP or DOWN button to select the desired
memory zone.
3. Press the START/STOP button to start measurement. The
cuff will inflate to the level that is right for you.
7
TOPCOM BPM Wrist 5331
(X)