Flashforge Dreamer User Manual page 47

4.Open FlashPrint,
select Wi-Fi, and enter the
click [Connect].
5. If successfully connected, you will see the following red mark.
Method 3： Connect Via WiFi--STA mode
1. Turn on Dreamer.
2. Turn on Wi-Fi on the Dreamer. Tap
4. A connection called "USR-WiFi232-G2" can be found on the list of available
networks. Connect to this network.
5. Open your Internet browser. Type in "10.10.100.254" and hit
keyboard. Enter the username and password to login. The default username and
password are both "admin"
5. Click on [Wor k Mode]
Dreamer User Guide | www.flashforge.com
click[Pr int]--[Connect Machine].
"IP Addr ess" as shown on printer touch screen. Then,
[Tools]-[Setting]-[WiFi]-[WiFi
The control panel will appear after a successful login.
and choose "AP+STA
Under
6-21
mode" and save it.
Flashforge Corporation
"Connection Mode",
ON].
[Enter ] on your
48