Flashforge Dreamer User Manual page 46

Hide thumbs Also See for Dreamer:

Table of Contents

Flashforge Corporation

Note: The machine icon on the bottom right displays the connection status:

Connected

Disconnected

Method 1：Connect Via USB Cable

a. Connect your Dreamer with your PC via an USB cable.

b. Turn on your Dreamer and start FlashPrint.

c. Click

[Pr int]--[Connect

Machine], then select USB in the

[Connection Mode]

option and select machine you want to connect in

[Select Machine]

option. If you can

not find your machine, click the

[Rescan]

button to scan your machine and select it.

Finally click

[Connect]

button to connect to the printer. If you still can not find your

machine after rescan, it means you haven't installed the driver in the software.

6-20

Method 2： Connect Via WiFi--AP mode

1. Turn on Dreamer.

Turn on Wi-Fi on the Dreamer. Tap

[Tools]-[Setting]-[WiFi]-[WiFi

ON].

3. A network called "USR-WiFi232-G2" can be found on the list of available

networks. Connect to this network.

Dreamer User Guide | www.flashforge.com

Table of Contents

Show Quick Links

Table of Contents