Flashforge Dreamer User Manual page 43

needs to be saved or not. Click
abandon it. If click [Cancel]
Saving
②
After finishing the model edit and adjustment, there are two ways below to save all
models in the scene.
Method 1:
Click [File]--[Save Pr oject]
".fpp" suffix, all models in the scene (include support) are independent. After
reloading the files, extruder configuration information and model position will be the
same as the configuration during saving.
Method 2:
Click on [File]--[Save as...]
For .stl and .boj, models are integrated as one (include support part). If load it again,
only the position of the model was saved, not included the printing parameters.
Pr efer ences
③
Click [File]--[Pr efer
when start.
Dreamer User Guide | www.flashforge.com
[Yes]
or close tool tip, then it will cancel the new project.
in the menu bar to save the file as a project file with the
to save the model as project file .fpp or .stl and .obj.
ences], you can choose language and if needs detecting update
will save the modification; click
6-16
Flashforge Corporation
[No] will
44