Flashforge Dreamer User Manual page 45

To clean up the recorded operating steps so as to release the memory.
Select All
④
By the following two methods, you could select all models in the scene.(When
models are too small to be seen or out of viewing scope, please click
[Scale] buttons to adjust the model.)
Method 1: Click [Edit]--[Select
Method 2: Press the shortcut
Duplicate
⑤
Select the object and duplicate the object through the following two methods:
Method 1: Click [Edit]--[Duplicate]
Method 2: Press the shortcut
Delete
⑥
Select the object and delete the object through the following two methods:
Method 1: Click [Edit]--[Delete]
Method 2: Press the shortcut
Auto Layout All
⑦
Click [Edit]--[Auto Layout All]
models will be placed automatically as automatic placement rule.
Repair Models
⑧
Click [Edit]--[Repair Models]
Suppor ts
⑨
Click [Edit]--[Suppor ts]
6.2.14 Pr int Menus
① Connect Machine
You can connect the Dreamer with your PC via a USB cable or WiFi.
Dreamer User Guide | www.flashforge.com
All].
Ctr l+A.
Ctr l+D
Delete
after loading one or more than one models, all
to repair models.
to enter supports setting interface.
Flashforge Corporation
[Center ] and
46