Flashforge Dreamer User Manual page 34

Click the [View] icon and then you can move the object by the following three
methods:
Method 1: Hold down the left mouse button and drag.
Method 2: Hold down the mouse wheel and scroll up and down.
Method 3: Hold down the Shift key, hold down the right mouse button and drag.
● Rotate
Click the [View] icon and then you can rotate the object by the following two
methods:
Method 1. Hold down the right mouse button and drag.
Method 2. Hold down the
● Scale
Rotate the mouse wheel to enlarge or shrink the build plate.
Set View
②
Allow users to view the object on the build plate. Six views are under the view menu,
that is, bottom view, top view, front view, back view, left view and right view.
Method 1: Click the the
Method 2: Click the the
appear with six views for selecting.
Reset View
③
Allow users to reset views by the following two methods:
Method 1: Click the
Method 2: Click the
viewing options, you can click [Reset].
Show Model Outline
④
Dreamer User Guide | www.flashforge.com
Shift key, hold down the left mouse button and drag.
[View] button, there are six views in the drop- down list
[Look] icon on the left, click it again and a submenu will
[View] menu and select
[View] button on the left, click it again and you will see the
[Home View]
Flashforge Corporation
35