Keysight Technologies M9300A Startup Manual page 32

M9300A PXIe Frequency Reference Module Troubleshooting
7. When the 10 MHz Out and OCXO Out controls are Enabled and there is no or low signal present, the module is defect-
ive and needs to be
8. Connect the spectrum analyzer to the 100 MHz BP Out connector and verify that the power is ≥ +10 dBm.
9. If the power level is low, the module is defective and needs to be
page 13.
32
repaired.See " Return a Module for Service" on page 13.
repaired.See " Return a Module for Service" on
Keysight M9300A PXIe Frequency Reference Startup Guide