Fisher & Paykel AeroSmart Series Installation Instructions And User Manual page 22

lnstalllLation instlructions
Grounding instructions for gas and electric dryers
EWectrka_ Shock Ha_rd
Make sure appliance is wired or plugged into a grounded out_et,,
Do not use an adaptor.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrica_
shock
E_ectrka_ Shock Hazard
Check with a qualified e_ectrician or serviceperson if you a_e in doubt as to
whether the appliance is property grounded.
Do not modify the plug if it will not fit the out_et.
Have the proper outlet installed by a qualified electriciano
Failure to follow these instructions can result in death, fire. or e_ectrical
shock.
Grounding for a cord<onnected appliance
This appliance must be grounded. In the event of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current.
When this appliance is equipped with a cord having an equipment-grounding conductor and a
grounding plug, the plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances, or in their absence, with the
National Electrical Code ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1. Do not cut or
remove the grounding prong from this plug.
Improper connection of _he equipmentogrounding
conductor can result in a risk of e_ectric shock. (beck with
a qualified electrician or service representative if you are in
doubt as to whether the appliance is properly grounded.
Refer to pages 21 - 27 for wiring details for electric dryers.