Fisher & Paykel AeroSmart Series Installation Instructions And User Manual page 19

_,L_ st a/111 a t i o n i,L_ s t,r u ct i o n s _z]
Fire Haza_'d
Use heavy meta_ exhaust duct,,
Do not use a p_astk exhaust duct.
Do not use thin metam foi_ exhaust duct
Failure to do so can resutt in death or _eo
Read the exhaust section (pages 12 - 15) before installing the exhaust system to determine the
maximum allowable exhaust duct length,
Do not use sheet metal screws when assembling ducting. Always use suitable duct tape,
Never use plastic or thin metal foil flexible exhaust material
The exhaust outlet is located close to the center of the rear of the dryer, Make sure you join the
exhaust duct to the dryer with duct tape only, This will prevent lint and dust from escaping from
the dryer and exhaust system,
13 %" (352 ram) 13 f/8"
(333
mm)
Fig. 75 Fxhdusl venting dimendons
The exhaust vent can be routed up, down, left, rght or straight out the back of the dryer,
Refer to diagram
Fig, 76 Vendng options
\\
//