Barco DICOM THEATER System Manual page 64

3. Click on the "Settings" button. The "BARCO DPMS Screen Saver
Control Panel" will open (figure 31).
4. Use the default schemes by selecting one of the three default
schemes. Click "OK". Then Click "OK" again.
Note: If you make any changes to any of the settings of one of the
three default schemes, the Current Scheme field will blank and you
MUST SAVE your changes by clicking on the "Save As ..." button.
When you click on the "Save As ..." button, the name of the last
scheme you used will be automatically displayed, you can then
choose to use that scheme name or enter a new name. If you enter
a name other than one of the three default scheme names, the
program will ask you if you wish to save the scheme as a
DEFAULT scheme (see figure 32 on the next page). Click "Yes" to
save the settings scheme as a DEFAULT scheme, click "No" to
save the scheme as a PRIVATE scheme. After you have saved the
scheme, then click OK and the new scheme will be in effect.
System manual DICOM Theater
Figure 31
65