Table of Contents
Advertisement
18. The "Ready to Install Program" page will now appear (figure 20),
click "Install" to install DPMS or "Back" if you wish to change any
of your DPMS installation settings.
During installation the wizard will display a progress screen.
19. When the "InstallShield Wizard Completed" page appears, click
"Finish".
The wizard will now display the screen shown in figure 21 below. If
you are finished installing your BarcoMed Software, click "Finish"
to exit the BarcoMed Product Install Wizard or click "Back" to
return to the Welcome Screen of the BarcoMed Product Install
Wizard to select additional software to install.
System manual DICOM Theater
Figure 20
Figure 21
43
Advertisement
Table of Contents
