17. The "Ready to Install Program" page will now appear (figure 11),
click "Install" to install DPMS or "Back" if you wish to change any
of your DPMS installation settings.
During installation the wizard will display a progress screen.
18. When the "InstallShield Wizard Completed" page appears, click
"Finish".
19. The wizard will now display the screen shown in figure 12. If you
are finished installing your BarcoMed Software, click "Finish" to
exit the BarcoMed Product Install Wizard or click "Back" to return
to the Welcome Screen of the BarcoMed Product Install Wizard to
select additional software to install.
System manual DICOM Theater
Figure 11
Figure 12
35