Installation Instruction
Figure 63
9. Attach the wires to the appropriate connectors in the terminal block.
Figure 64
10. Pull the cable back through the cable gland and clamp it by screwing the
52
Wire Connections Variant 2
Note: See the Site Installation Documentation for more information on the
alarm cable connections.
OVP Module Connection Points
cable gland together from underneath. See figure below.
Note: Make sure that the outer screen is in contact with the earth
grounding of the cable gland.
1/1531-COH 109 2073 Uen H 2006-11-06
P016851A