Figure 34
2. Remove the screw from the mounting hole for a gas-evaporating tube. The
3. Screw the angled nipple into the hole.
4. Attach the end cap on the leftmost battery (battery 1) as shown in the
5. Attach the gas-evaporating tubes between the batteries as shown in below.
6. Attach the gas-evaporating tube between the nipple and the rightmost
1/1531-COH 109 2073 Uen H 2006-11-06
Inter-Block Connections
hole is positioned in the cabinet floor as shown in the figure below.
figure below.
battery (battery 4) as shown in the figure below.
Procedure
31