Table of Contents
Advertisement
Installation Instruction
Figure 3
4. Screw the four M12 eyebolts into the top of the cabinet, as shown in the
Figure 4
5. Attach lifting straps to the eyebolts and lift the cabinet.
6. Position the cabinet and lower it into the place for installation.
8
Roof and Cabinet Attachment
figure below. Tighten them finger-tight.
Eyebolt Attachment
Note: The angle of the lifting strap at the hook must not be more than 90 ,
as shown in the figure below. (This is equivalent to the angles
between the lifting strap and the cabinet roof being at least 45 .)
Note: Ensure that cabinet is level in all directions.
1/1531-COH 109 2073 Uen H 2006-11-06
Hide quick links:
Advertisement
Table of Contents
