Figure 5
7. Remove the lifting straps and eyebolts.
8. Insert four washers and M16 locking bolts and tighten them to the
9. Attach the roof by pushing it straight backwards. Screw in the five bolts
1/1531-COH 109 2073 Uen H 2006-11-06
Cabinet Lifting
appropriate torque (depending on the material to which the cabinet is
attached), using a torque wrench and a 24 mm Open-ended head.
and tighten them to a torque of 8 Nm, using a 6 mm hexagon bit and a
torque wrench.
Procedure
9