Introduction; Overview; What's Included In The Package; Equipment Protection - Black Box 10BASE-T Manual

Hide thumbs Also See for 10BASE-T:

Table of Contents

The 10BASE-T Extender is a high-performance Ethernet repeater that operates

over a spare pair of telephone wires already in the walls or buried in the ground.

It works with any IEEE 802.3 compatible Ethernet system.

Check to make sure that your LZ6000A-R4 kit contains the following items.

If anything is missing or damaged, please call Black Box at 724-746-5500.

• (1) 10BASE-T Extender (part number LZ6000A-R3)

• (1) surge protector (part number SP512A-R2)

• (1) Velcro

strip for wall mounting

• (1) AC power supply, 100-250 VAC autosensing

• (1) North American power cord

You must be extremely careful to ensure the safety of persons and equipment

whenever using wires that run between buildings. Both underground cable runs

that are near the surface and overhead runs are at risk of damage from lightning

strikes and must be suitably protected. This protection must be in place or there

will be risk of serious injury or death. The service entrance at each end of the wires

should be protected in strict accordance with local safety codes. In addition, to

further reduce the risk of injury and/or damage to equipment due to lightning

strikes or accidental connection to hazardous AC line voltages, secondary circuit

protection, included with this product, must be installed.

Outdoor cabling installed by the phone company is typically installed with gas-

discharge protection devices, carbon blocks, or no protection devices at all. If

cabling has protection, DO NOT BYPASS these devices—they will help protect

both your equipment and all those who work with it.

2. Introduction

10BASE-T EXTENDER

Table of Contents