Black Box 10BASE-T Manual page 12

3.1 Tools and Parts Needed
Installing the 10BASE-T Extender is fast and simple, but does require tools you
may not normally have around the office. Before you begin installation, be sure
you have everything on this list:
• A site plan for your office showing the locations of all the wiring closets
(a rough sketch will do)
• A punchdown tool (sometimes called an impact tool)
• An RJ-45 crimping tool
• An ohm meter
Call Black Box Technical Support at 724-746-5500 to find out how to obtain
these tools.
Figure 3-3. Punchdown tool.
10BASE-T EXTENDER
11