Subscribe to Our Youtube Channel
Related Manuals for Black Box LB512A-KIT
Summary of Contents for Black Box LB512A-KIT
- Page 1 LB512A-KIT LB510A-R2 Long Range Ethernet Extender Extend corporate LAN communications at higher speeds or at a longer distance. 724-746-5500 | blackbox.com...
- Page 2 Black Box Long Range Ethernet Extender SOFTWARE UPGRADE TABLE OF CONTENTS B. INTERFACE PINOUTS GENERAL INFORMATION .................9 B.1 LINE PORT Features ....................9 Description..................9 B.1.1 RJ-45 Power Input Connector ..............10 1.3.1 External AC universal power supply........10 • Pin 4: Tip 1.3.2...
- Page 3 Black Box Long Range Ethernet Extender Table of Contents A.14 THIRD PARTY SOFTWARE LICENSES A.4 Configuration ..................23 NOTE: the LB512A-KIT includes software developed under third party licenses, con- A.5 Power and Power Supply Specifications .......... 24 tact Black Box for more information. A.5.1 External AC universal power supply ........
- Page 4 Black Box Long Range Ethernet Extender SOFTWARE UPGRADE RADIO FREQUENCY INTERFERENCE STATEMENTS • Output FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO -Rated voltage: 5 VDC ± 5%, 5W FREQUENCY INTERFERENCE STATEMENTS -Rated current: 1 A DC This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s...
- Page 5 The LB512A-KIT comes with either an AC or DC power supply: (Normas Oficiales Mexicanas Electrical Safety Statement) • The supply’s connection to the LB512A-KIT is a 2.5 mm barrel receptacle with 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de the center conductor positive.
- Page 6 Black Box Long Range Ethernet Extender Safety When Working With Electricity 14.El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomenda- A. SPECIFICATIONS ciones del fabricante. 15.En caso de existir, una antena externa deberá ser localizada lejos de las lineas A.1 LINE RATE...
- Page 7 2-3 minutes to complete. To upgrade the software: • This device contains no user serviceable parts. This device can only be repaired by qualified service personnel. 1. Connect to the LB512A-KIT via the Ethernet management port and a Telnet ses- sion. WARNING •...
- Page 8 Black Box Long Range Ethernet Extender In accordance with the requirements of council directive 2002/96/EC on Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate this product from other waste and scrap and deliver to the WEEE col- lection system in your country for recycling.
- Page 9 R2 extenders) are easy to use and take advantage of existing copper twisted- To apply power to the LB512A-KIT, first be sure that you have read section 1.3, “Power pair infrastructure to connect Ethernet networks or devices at high speeds Input Connector”...
- Page 10 Power connection barrel receptacle 5 VDC diagram Figure 2. 2. Connect the barrel plug to the Power connector on the LB512A-KIT. NOTE: The LB512A-KIT powers up as soon as it is plugged into an AC outlet—there is 1.3.1 External AC universal power supply. no power switch.
- Page 11 OFF or all ON before powering-up the LB512A-KIT. When all the DIP switches AWG (0.4mm) (the higher number gauges will limit distance). Standard dial-up are set to any position other than all OFF or all ON the LB512A-KIT will operate in telephone circuits, or leased circuits that run through signal equalization equip- hardware (DIP-switch)-configuration mode.
- Page 12 2.2 CONFIGURING THE DIP-SWITCHES • help: Lists all the commands that the console recognizes. The LB512A-KIT is equipped with three sets of DIP switches, which you can use to configure the extender for a broad range of applications. This section describes switch 2.4.3 Example command line interface session...
- Page 13 If the DIP The LB512A-KIT offers a 10/100 Ethernet port to view the current DIP settings via Tel- switches are set to anything other than all OFF or all ON, the net sessions.
- Page 14 Black Box Long Range Ethernet Extender CONFIGURATION S4-2 S4-3 S4-4 S4-5 S4-6 S4-7 S4-8 Data Rate (kbps) S4-2 S4-3 S4-4 S4-5 S4-6 S4-7 S4-8 Data Rate (kbps) 1152 3328 1216 3392 1280 3456 1344 3520 1408 3584 1472 3648 1536...
Need help?
Do you have a question about the LB512A-KIT and is the answer not in the manual?
Questions and answers