Connecting The Extender To The Phone Block - Black Box 10BASE-T Manual

Shorting Plug
Typical for
Connection to
10 Base-T Hub
(Default)
(looks like
a NIC)

3.9 Connecting the Extender to the Phone Block

Attaching the cable wires to the phone block requires the use of a punchdown or
impact tool. The wires must be "punched down" on forked pins corresponding to
the phone wire pair used for each end of the long-distance span.
Moving Jumpers
"Crosses Over"
signals (the
same as if
using a
Crossover
Cable)
Figure 3-9. Jumper Settings.
10BASE-T EXTENDER
Link Test Link Test
Disabled Enabled
(Default)
17