Black Box 10BASE-T Manual page 15

10BASE-T EXTENDER
2. Locate and identify each pair of wires that you will use for the long distance
interconnection. The wire pairs must only run between the two points to be
connected. The link will not connect if there is a bridge tap anywhere on the
link (see Figure 3-6).
To To
10BASE-T
XL600L
Extender
Figure 3-6. Long-distance links and bridge taps—correct connection.
To
10BASE-T To
Extender
XL600L
A third point
cannot be tied
into the link.
Figure 3-7. Long-distance links and bridge taps—incorrect connection.
14
1
2
To
10BASE-T
XL600L
3
To
To
10BASE-T
XL600L
Extender
To
Extender