6. Programming
6.1. Read/Write of operation parameter settings area
Write operation parameters settings area (PUT, PUTP command)
Type
n1
Slot number where the special module is installed
Start address of special module's internal memory to write
n2
data.
S
Device's start address or integer with saved data to write.
n3
Number of word data to write
< Difference between PUT command and PUTP command >
PUT: Always executed with execution condition On (
PUTP: Executed with execution condition of operation start (
Example
108
Analog Input Module 2MLF-AV8A, AC8A User's Guide
Description
Honeywell
Area available
Integer
Integer
M,P,K,L,T,C,D,#
D,integer
Integer
)
)
R200
September 2010