Example Using Put/Get Instruction - Honeywell 2MLF-AV8A User Manual

5. Configuration and Function of Internal Memory
5.5. PUT/GET function block use area (parameter area)

Example using PUT/GET instruction

Enable channel
1.
2.
3.
4.
B15 B14 B13 B12
- - - -
94
Function Block
GET_INT
GET_UINT
GET_DINT
GET_UDINT
You can enable/disable A/D conversion per channel.
Disable channel to reduce the conversion cycle per channel.
When channels not designated, all channels are set as not used.
Enable/disable of A/D conversion is as follows.
B11 B10 B9
- - -
BIT
0 Stop
1 Run
Analog Input Module 2MLF-AV8A, AC8A User's Guide
Output (ANY) Type
INT
UINT
DINT
UDINT
B8 B7 B6 B5
- CH7 CH6 CH5
Description
Honeywell
Description
Read data as much as
INT from the designated
module address
(MADDR).
Read data as much as
UNIT from the designated
module address
(MADDR).
Read data as much as
DINT from the designated
module address
(MADDR).
Read data as much as
UDINT from the
designated module
address (MADDR).
B4 B3 B2
CH4 CH3 CH2
R200
September 2010
B1 B0
CH1 CH0