Honeywell 2MLF-AV8A User Manual page 130

7. Troubleshooting
7.1. Error codes
ATTENTION
1.
2.
3.
130 Analog Input Module 2MLF-AV8A, AC8A User's Guide
# of the error code stands for the channel with error found.
If two or more errors occur, the module saves only the first error code.
When the error is found and corrected, use the 'flag to request error
clear'. For more information, refer Error Clear request Flag (UXY.11.0, X:
Base No., Y: Slot No); or restart the unit. This stops the blinking LED and
has the unit ready to detect the next error code.
Honeywell
R200
September 2010