FRED easy
Step 1
Step 2
User Guide
4.6.2
Manual defibrillation procedure
Patient hazard — Only a physician is allowed to enable manual mode. Observe the
instructions given in section
Switching on and preparing the device
1. Briefly press the green button (max. 1 second)
2. Switch to manual mode by simultaneously pressing the green and orange buttons
+
. Confirm the switching by simultaneously pressing these same buttons
a second time.
3. Connect the electrode cable to the device.
4. Apply the electrodes on the patient's upper body (see
electrodes).
Charging the energy
5. Briefly press the green button
Patient hazard — Press the green button
energy charging. If you press the button for too long, the device is switched off.
Manual Defibrillation (option)
4.1 Instructions and Safety
to switch on the device.
(max. 1 second).
only briefly (max. 1 second) to start the
Defibrillation
4.6
Notes.
4.3 Applying the adhesive
Page 45
4