Tftp Put - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
configuration file backup of the cluster members. For TFTP server rights and directory
configuration, refer to the user guide of the TFTP server software.
Related commands: tftp put, tftp-server.
Note:
You need to specify the cluster keyword completely in the command.
For description of other parameters of the tftp command, refer to the
FTP-SFTP-TFTP part of the manual.
Examples
# Download file LANSwitch.app from the shared TFTP server of the cluster to the
switch and save it as vs.app.
<123_1.Sysname> tftp cluster get LANSwitch.app vs.app

2.3.23 tftp put

Syntax
tftp { cluster | tftp-server } put source-file [ destination-file ]
View
User view
Parameters
cluster: Uploads files through the shared TFTP server of the cluster.
tftp-server: IP address or host name of the TFTP server.
source-file: File name to be uploaded to the shared TFTP server.
destination-file: Name of the file to which the uploaded file will be saved in the storage
directory of the TFTP server.
Description
Use the tftp put command to upload a file from the switch to a specified directory on the
TFTP server.
You can use the tftp-server command on the management device to configure the
shared TFTP server of the cluster, which is used for software version update and
configuration file backup of the cluster members. For TFTP server rights and directory
configuration, refer to the user guide of the TFTP server software.
Chapter 2 HGMP V2 Configuration
2-41
Commands