Ftp-Server - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Related commands: ftp-server.
Note:
For how to access other FTP servers using the ftp command, refer to the
FTP-SFTP-TFTP part of the manual.
Examples
# Connect to the FTP server shared by the cluster.
<123_1.Sysname> ftp cluster
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password:
230 User logged in.

2.3.15 ftp-server

Syntax
ftp-server ip-address
undo ftp-server
View
Cluster view
Parameters
ip-address: IP address of the FTP server to be configured for the cluster.
Description
Use the ftp-server command to configure a shared FTP server for the cluster on the
management device.
Use the undo ftp-server command to remove the shared FTP server setting.
By default, the management device acts as the shared FTP server of the cluster.
After you configure the IP address of the shared FTP server on the management device,
the member devices in the cluster can access the shared FTP sever through the
management device to back up configuration and download software. The IP address
Chapter 2 HGMP V2 Configuration
2-34
Commands