H3C S3100 Series Command Manual page 26

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Note that, the collection of candidate/member devices are based on NTDP. Therefore,
you must first enable NTDP. In addition, you can use the ntdp hop command in system
view to change the collection range.
When the system automatically adds a device to the cluster, if the user password
configured for the device is different from that of the management device, the device
cannot be added to the cluster.
Note:
After a cluster is built automatically, ACL 3998 and ACL 3999 will automatically
generate a rule respectively to prohibit packets whose source and destination
addresses are private IP addresses of the cluster from being sent to or received
from the public network. The two ACL rules will be automatically applied to all ports
of the cluster members.
After a cluster is built automatically, ACL 3998 and ACL 3999 can neither be
configured/modified nor removed.
Examples
# Start an automatic cluster building process.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] cluster
[Sysname-cluster] auto-build
There is no base topology, if set up from local flash file?(Y/N)
n
Please input cluster name:aaa
Collecting candidate list, please wait...
#Apr 3 08:12:32:832 2000 aaa_0.Sysname CLST/5/Cluster_Trap:- 1 -
OID:1.3.6.1.4.1.2011.6.7.1.0.3(hgmpMemberStatusChange):member
00.00.00.00.00.12.
a9.90.22.40 role change, NTDPIndex:0.00.00.00.00.00.12.a9.90.22.40, Role:1
Candidate list:
Name
Sysname
H3C
H3C
SwitchA
H3C
Chapter 2 HGMP V2 Configuration
Hops MAC Address
2 0016-e0c0-c201
2 000f-e221-616e
2 000f-e202-2180
2 0016-e0be-e200
3 000f-e200-1774
2-18
Commands
Device
H3C S3600-28F
H3C S3600-28F
H3C S3600-28P
H3C S5600-26C
H3C S5600-26F