H3C S3100 Series Command Manual page 10

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Interface: Ethernet1/0/2
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet1/0/3
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
......(Omitted)
# Display NDP information about Ethernet 1/0/1.
<aaa_0.Sysname> display ndp interface Ethernet 1/0/1
Interface: Ethernet1/0/1
Status: Enabled, Pkts Snd: 15835, Pkts Rvd: 2879, Pkts Err: 0
Neighbor 1:
MAC Address : 000f-e20f-1234
Host Name
Port Name
Software Ver: V100R002B01D001
Device Name : H3C S3100
Port Duplex : AUTO
Product Ver : 3100
BootROM Ver : 506
Table 2-1 Description on the fields of the two commands
Neighbor Discovery Protocol is enabled
Neighbor Discovery Protocol Ver: 1
Hello Timer
Aging Timer
Interface
Status
Pkts Snd:
Pkts Rvd:
Pkts Err:
Aging Time: 147(s)
: 1234_2.Sysname
: Ethernet1/0/1
Field
2-2
Chapter 2 HGMP V2 Configuration
Description
NDP is enabled globally on the switch.
NDP version 1 is running.
Interval for the switch to send NDP
packets, which is configured through the
ndp timer hello command
Holdtime for neighbors to keep the NDP
information of the switch, which is
configured through the ndp timer aging
command
Port index, used to identify a port
NDP state on the port
(enabled/disabled)
Number of NDP packets sent by the port
Number of NDP packets received by the
port
Number of error NDP packets received
by the port
Commands