Topology Accept - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Table 2-12 Description on the fields of the display ntdp single-device command
Field
Hostname
MAC
Hop
Platform
IP
Version
Cluster
Peer MAC
Peer Port ID
Native Port ID
Speed
Duplex

2.4.7 topology accept

Syntax
topology accept { all [ save-to local-flash ] | mac-address mac-address |
member-id member-id | administrator }
View
Cluster view
Parameters
all: Accepts the current cluster topology as the standard topology.
save-to: Saves the standard topology of the current cluster to the local Flash or the
cluster FTP server.
local-flash: Saves the standard topology of the current cluster to the local Flash.
mac-address mac-address: Accepts adding the device with the specified MAC
address to the standard topology of the cluster.
member-id member-id: Accepts adding the device with the specified member ID to the
standard topology of the cluster.
administrator: Accepts adding the administrative device to the standard topology of
the cluster.
System name of a device
MAC address of the device
Number of hops from the device to the topology-collecting device
Platform information of the device
IP address and mask length of the management VLAN interface of
the device
Version information
Role the device plays in the cluster
MAC address of the peer device
Name of the port on the peer device connecting to the local device
Name of the port on the local device connecting to the peer device
Rate of the local port connecting to the peer device
Duplex mode of the local port connecting to the peer device
2-52
Chapter 2 HGMP V2 Configuration
Description
Commands