Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Examples
# Enable NTDP globally, and then enable NTDP on port Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ntdp enable
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] ntdp enable
2.2.4 ntdp explore
Syntax
ntdp explore
View
User view
Parameters
None
Description
Use the ntdp explore command to manually start a topology collection process.
NTDP is able to periodically collect topology information. In addition, you can use this
command to manually start a topology collection process at any moment. If you do this,
NTDP collects NDP information from all devices in a specific network range (which can
be set through the ntdp hop command) as well as the connection information of all its
neighbors. Through this information, the management device or the network
management software knows the topology in the network range, and thus it can
manage and monitor the devices in the range.
Examples
# Start a topology collection process.
<Sysname> ntdp explore
2.2.5 ntdp hop
Syntax
ntdp hop hop-value
undo ntdp hop
View
System view
Chapter 2 HGMP V2 Configuration
2-11
Commands