Folding Custom Size Sheets - Horizon Fitness PF-P3100 Manual

Folding Custom Size Sheets

This section shows the setup procedure for folding custom size sheets..
Select the fold pattern.
S
2nd Stopper Knob
12
23056
30101A1
23056
30101B1
23056
30101C1
Ex: Adjust to 250 mm (25 cm)
S
L
L
1st Stopper Knob
23056
30101D1
Fold the sheet to the desired fold
pattern.
Measure the length of each folded part.
- Use these lengths to set the positions of the 1st stopper
and 2nd stopper.
For different kinds of folds, you will measure different
parts of the sheet. See the note on the next page.
Select the fold pattern.
- On pages 4 and 5, follow the steps from "Attach the
support table." to "Set the support rollers." Select the
fold pattern using the Fold Pattern Select button.
Set the stoppers.
- Adjust the 1st stopper to match the 1st measured
length, and the 2nd stopper to match the 2nd measured
length.
CAUTION
- Turn the stopper knobs gently. If the
stopper reaches the end of its normal
range, do not turn the stopper knob any
further.
- Complete the setup for the stoppers. On page 7,
follow the steps starting with "Lift the feed tray
lever."