If There Are Frequent Double Feeds - Horizon Fitness PF-P3100 Manual

If there are frequent double feeds:

There is a problem because the sheets are not loaded in the feed tray properly.
Check Points
Check whether the
sheets are properly
loaded in the feed tray.
There is a problem even though the sheets are properly loaded in the feed tray.
Check Points
Check whether the
sheets are sticking to
each other because of
ink or static electricity.
Check whether the
double feed stop plate
pressure is set properly.
Check whether the
feed table adjusting
lever is properly set.
Check whether the
double feed stop plate
is stained with ink.
There is a problem even after the double feed stop plate is cleaned.
Check Points
Check whether the
double feed stop plate is
worn out.
Causes and Remedies
- The sheets must be loaded in the feed tray
properly.
23056
40201B1
Causes and Remedies
- Fan the sheets completely before loading
them in the feed tray.
23056
40202A1
- Set the double feed stop plate pressure
Normal
properly.
- If the pressure is set to Weak, change the
setting to Normal.
23056
40202B1
- Check whether the feed table adjusting
Normal
lever is properly set.
- If the pressure is set to Strong, change the
setting to Normal.
23056
40202C1
- Clean the double feed stop plate using a
Cleaning
cloth. If the folder is not used for a year, the
double feed stop plate may deteriorate.
Replace it with a new part.
23056
40201G1
Causes and Remedies
- Replace the double feed stop plate with a
new one.
- The part should be replaced after 15 to 30
million fold, depending on the sheet type.
23056
- If the folder is not used for a year, the
40201J1
double feed stop plate may deteriorate.
Replace it with a new part.
Troubleshooting
Page
5
Page
5
19
19
35
Page
35
25