Horizon Fitness PF-P3100 Manual page 53

Machine Description
Support Rollers
These rollers hold down the front
edge of each sheet.
Feed Roller
This roller feeds each sheet into
the fold roller section.
Control Panel
Display
0, 1, 2 - - - : Number of folds
H1 to H4 : Delivery roller position
(Refer to page 6.)
E1 to E7 : Error code
(Refer to page 22.)
Clear Button
This button resets the fold
count to zero. The number
can be reset whenever a
number is displayed on the
screen.
Speed Button
This button selects the folding speed.
Alarm Signals
If the Start button is pressed while the feed tray lever is lowered
If the cover is open
If the buckle chute is not in position
Beep, Beep, Beep
If there are repeated feed errors
If there is a sheet jam
This alarm warns that the motor may start unexpectedly.
If the operation is changed from power saving mode to normal
Long Beep
operation mode while the feed tray lever is raised
If the fold section cover is closed while the feed tray lever is raised
This alarm indicates that the power has been turned on.
Beep
After the power switch is turned on and the folder is ready to fold
When the folder is going into the power saving mode
48
Fold Pattern LEDs
These LEDs show the selected fold pattern.
Sheet Size LEDs
These LEDs show the selected sheet size.
Sheet Size Select Button
This button selects the size of the sheet to be folded.
Fold Pattern Select Button
This button selects the fold pattern.
Speed LEDs
These LEDs show the selected speed.
Fold Roller Pressure Lever
Set the fold roller pressure lever to Strong
when thick sheets (105 gsm, 28# bond, 70# book
or more) are folded. Set the fold roller pressure
lever to Normal when thinner sheets (less than
105 gsm, 28# bond, or 70# book) are folded.
(Refer to page 20.)
Feed Table Adjusting Lever
If there are frequent misfeeds if you
are feeding heavier sheets (82 gsm,
22# bond, or 55# book or more), set
the adjusting lever to the Increased
position. (Refer to page 20)
Start/Stop Button
This button starts and stops
the folding.
Test Button
This button feeds one sheet
for test folding.
23056
70201B1