Fold Mechanism - Horizon Fitness PF-P3100 Manual

Fold Mechanism

This section explains how the machine makes the folds.
Feed Roller
Feed Roller
Fold Roller
Feed Roller
Fold Roller
Feed Roller
Sheets
Fold Roller
Sheets
Double Feed Stop Plate
23056
70301A1
Sheets
Fold Roller
Stopper
Fold Roller
23056
70301B1
Sheet Bend
Stopper
Fold Roller
23056
70301C1
Fold Roller
Stopper
Fold Roller
23056
70301D1
Sheets are fed.
- The feed roller rotates and feeds each sheet into the
buckle chute.
The sheet hits the stopper in the buckle
chute.
The sheet is bent slightly.
- When the folding speed is set to High, the amount of
sheet bending changes slightly. Set the stopper
position 1 mm shorter than the normal setting.
(Refer to the note on page 7)
- When folding heavier sheets, the sheet is not bent as
much. Set the folding speed to High to create a larger
bend in the sheet.(Refer to page 46.)
The sheet is folded.
- The fold rollers nip the sheet bend and the fold edge is
created.
- Adjusting the stopper position changes the fold position.
49